Contact Us

Contact Us

Please get in touch using the form below

View our full Privacy Policy
Contact for Immediate Assistance Tel: +44 (0) 1795 580808 Email: info@mitgroup.co.uk
Transfluid achieve DNVL-GL type approval for marine hybrid modules and batteries

Transfluid achieve DNVL-GL type approval for marine hybrid modules and batteries

We are proud to announce that Transfluid is the first company in the world to have obtained two DNV-GL Type approvals for their hybrid technology. The first, for their complete range of marine parallel hybrid modules and secondly for their LiFePO4 battery banks.Hybrid Marine

The battery type-approval also includes the Norwegian Maritime Authority (NMA) extension, a stricter list of requirements making the Translfuid batteries the safest, worldwide. The total absence of carbon and graphite, avoid profoundly destructive “thermal runaway”, which is one of the most extensive tests required to be undertaken to obtain DNV-GL and NMA approvals.

Hybrid Battery Pack

The parallel hybrid technology permits genuine redundancy on board. Propulsion comes from either the internal combustion engine or through the electric motor, connected to the same powertrain. Should an electrical blackout occur, the i.c.e. is capable of operating the propulsion system. In the event of i.c.e failure, the electric motor serves as a second means of power. This parallel technology can deliver “boost mode” mode for short bursts, adding the electric motor power to the i.c.e. power, achieving increased responsiveness under varying conditions.

The electric machine is both the motor and generator, allowing fast battery charging during i.c.e. operation, alleviating the need for shore recharging infrastructures, the most significant barrier towards a fully electric solution.

The innovative combination of Transfluid’s hybrid transmission and batteries in a plug and play supply, deliveries one of the safest and most reliable ‘green propulsion’ solutions, available in new build or as a retrofit option.

Transfluid’s heritage stems from more than 60 years of working on industrial applications with a combination of “traditional” mechanical and hydraulic products and the addition of the new permanent magnet electric technology.

Transfluid products are design and manufactured in house, all while striving to exceed excellence and safety standards, and will continue long into the future as they work to obtain further type approval throughout 2020.

With proven hybrid technology for workboats operating within the UK, talk to us about our retrofit and new build hybrid/electric solutions available to future proof your business. Contact Us.