Top bar

MIT deliver Bespoke Exhaust Suspension System by Rubber Design for Sir David Attenborough Polar Research Vessel

MIT deliver Bespoke Exhaust Suspension System by Rubber Design for Sir David Attenborough Polar Research Vessel

MIT deliver Bespoke Exhaust Suspension System by Rubber Design for Sir David Attenborough Polar Research Vessel

Sir David Attenborough Polar Research Vessel

MIT has successfully delivered a bespoke exhaust suspension system to Cammell-Laird Shipbuilders in Liverpool who have the official contract to build the 128m, 5,000t Sir David Attenborough world-class polar research vessel.

Designed by Rolls-Royce, the vessel is set to be the first of its kind. With the ability to carry a scientific cargo of approximately 900 cu meters with an icebreaking capability of up to 1m thick at 3 knots, she will be able to withstand up to 60 days at sea within the Polar Regions. Travelling up to 19,000nm at 13 knots of transit the vessel will house up to 29 crew and officers and up to 60 scientific and support staff, along with boasting a heli-deck and hanger, a science hanger, a moon pool and on-board submersible which will be deployed for underwater research.

Due to the nature of her work in natural environments, the critical challenge to a diesel engine exhaust system is the ability to run at full power while emitting the least noise and vibration as possible, both within the vessel and into the marine environment. Limiting the levels of noise and vibration pollution provides minimal disruption to marine life and to the scientific measuring equipment on board, which is imperative to operations such as those that will be carried out on her deployment.

This challenge, accepted by Rubber Design, a leading international specialist in solutions for noise, vibration, and shock related problems. Experts at developing solutions that isolate the source of disturbance reducing marine noise and vibration pollution for an array of ocean-going projects.

Sir David Attenborough Polar Research Vessel

 

Working from plans supplied by Rolls-Royce, the expertise of Rubber Design meant they were able to provide a bespoke system built precisely to design specifications. The suspension system will comprise of 148 fixed-point mounts, 142 stabilisers, and 30 stainless steel bellows, forming the complete section that will hold in place the chosen exhaust system. A typical array from Rubber Design would be equipped with double elastic mounting systems, with calculations and design provided for not only the intermediate frame but a variety of measurements to determine the optimum mounting types, rubber hardness and frequency calculations to aid in the reduction of noise and vibrations.

The relationship built between Rolls-Royce and Rubber Design on previous projects and the engineering excellence and product adaptability of Rubber Design products made them the clear supplier of choice when addressing such a significant portion of the specification and build. The vessel is fitted with 2 × Bergen B33:45L6A (2 × 3,600 kW) and 2 × Bergen B33:45L9A (2 × 5,400 kW) diesel/electric engines to improve fuel consumption and reduce environmental impact.

MIT provided local technical and logistics support while also ensuring that each of the 320 individual components was delivered on time to each exact job location, ensuring that the build plans were on schedule.

Both MIT and Rubber Design are proud to have been involved with the delivery of this project and to play a part in the increased UK scientific presence within the Polar Region.

The Sir David Attenborough research vessel will be operated by the British Antarctic Survey and is due to enter service in 2019; we eagerly await her first expedition.

About MIT:
Since 1974, MIT has been designing, supplying and servicing transmissions and driveline systems across the UK/Ireland, becoming a centre of excellence in driveline systems providing customers with full product life cycle support from system design, supply, commissioning, maintenance, repair, spares, and overhaul or replacement.  MIT has bases in southern and northern England, providing comprehensive UK and Ireland coverage along with an established global mobile support service, delivered by a highly trained and dedicated technical engineering team and a significant inventory of world-class brands, including new and refurbished transmissions, driveline systems and spare parts.

MIT is the UK/EIRE distributors of Rubber Design, Twin Disc, Transfluid, Arneson, Rolla and Quincy Compressors.

About Rubber Design:
Rubber Design, an independent family-owned company, established in 1979, has become one of the leading international specialists when it comes to offering solutions for vibration, noise and shock related problems in the maritime sector. Their technical expertise, creativity, and problem-solving capability together with the high level of service make Rubber Design well known throughout the industry.

Media Enquiries
Louise Woolley
Marketing Manager
e: l.woolley@mitgroup.co.uk
t: +44 (0) 2380 455 447

Images courtesy with thanks from Rolls-Royce

No comments yet.

Leave a Reply